I had successfully cut 2 parts in 3/4" plywood (table saw push sticks with finger cutouts). The remaining space on the plywood sheet allowed a third piece so I flipped vertically and horizontally the part in Easel and reset my starting point. Cutting was doing well, until I noticed that Easel did not honor the tabs when changing the layout orientation. In fact, Easel removed the tabs in the cutout. As a result, no tabs for the interior cutout caused that waste piece to move and affect the router position. As it continued, it went off course and I hit stop.
Now the issue is that the Y steppers sound awful since they are not moving linearly together in sync as before. I assume the gantry is crooked in its positioning. So what is the fix? Do I have to undo the belts and reset belting, tensioning, etc?
(The fact that Easel does not honor tab positions and removes tabs when orientation is changed is concerning!)