Just getting started with my X-Carve so I designed this X-Carve Tool Tray to organize all of my clamps, ramps, bases, bits and other accessories I have and neatly place them on available space over the Controller Side Board.
A 3mm wide shoulder was routed around the tray to hold an optional acrylic cover in the future.
9 Likes
I really like that! Good job and one other thing…the machine is way too clean 
That is awesome, is it shared in Easel?
Hi Scott
Thank you! Yes, it is shared in Easel. You can open it here: X-Carve Tool Tray | Inventables
Hi Pat,
Thank you! I agree. I’m just getting started but I need to start cranking real work with it now. 
Hi. Your Easel project says the stock was 12x24. What are the dimensions of the finished piece? I only have the 500mm machine.
Hi, Amy. The finished piece is 410mm x 180mm. I believe your machine’s work area is 250mm x 250mm, which is effectively ~84.68% of the area of my piece. Given the unused space on my piece, I believe you can come up with a very nice tray design you can carve on your X-Carve to accommodate the same number of pieces. I hope this helps and let me know if you have any other questions. Happy to help.