Has anyone used their X Carve to engrave/carve things on gun parts like the lower receiver? I had someone ask me about doing it for them and I am not sure.
sorry @PhilJohnson but that is not true.
I did my AR and used Bcnc auto-level feature to map out the area before carving, used a V-Bit and it worked great, now I have my family crest on the magwell. worked great and looks great.
2 Likes
@MarkDehart google some videos on Bcnc auto-level and see how it works, it is not to bad to learn to set-up and when you get the hang of it, it works great. I just got a piece of scrap aluminum from the junk yard and run a few practice runs to make sure that I had all the kinks worked out and that it measured correct before doing the real thing. you will only get one chance to get it right on the lower.
2 Likes
it is a sender program that use’s GRBL so you have no need to flash or even change your GRBL settings.
here is the link to the program Home · vlachoudis/bCNC Wiki · GitHub
here is a direct link to the autolevel feature AutoLevel · vlachoudis/bCNC Wiki · GitHub
I like that it is a local install like UGS and it has so many more features.
3 Likes