X-Carve 1000mm x 1000mm Mirrored Assembly finished!

X-Carve
1

I just finished Assembling my X-Carve 1000mm over the weekend! It took me like 23.5 hr to build with many many distractions of a baby, a dog, and uh… oh yeah a wife :grin: I was projected to wait 2 more weeks for final box but thank you Inventables for the hard work i received it early and finished the build. I was planning on building my CNC table first however when i saw the final box come in i was to eager and excited to start the building challenge :smiley:

I would like help on what type of table I’m going to make. the X-Carve is going in my office that I share with my wife and the floors are uneven. I plan to build the table in the corner (With X-Control box on right side of CNC) and i plan on shooting the vacuum hose underneath table and making a hole in the back wall into the exterior porch room so it will be a lot more quiet for us. I need to make sure this will not move or rack with the moving of the motors and the weight of CNC plus materials. I do plan to eventually build an enclosure on top but starting with a good level torsion box/ Table top would help me get started right away.

Plywood construction? MDF? 2x4’s? I did think about putting locking casters on it but i honestly don’t plan on moving it. leveling glides maybe. Any insight would help. I want to get it off my current old interior door on its side over saw horses.

Thanks guys!

20180624_211004[1]
20180624_211004[1]2851×1603 1.31 MB

20180625_010659[1]
20180625_010659[1]2851×1603 1.14 MB

2

Go to xcarve workspace showcase here on this forum. There are tons of pictures showing all kinds of ideas. Welcome to the group

3

Thanks! I didn’t see that forum.Ill check it out and hopefully build something this weekend.

1 Like