Ok, I’m new and although not computer illiterate, definitely not great at it… Easel works fine but I’m trying to do some stuff in Vcarve Pro and I’m having trouble importing from/exporting to (Vcarve to Easel) I d-loaded the latest PP from Inventables and when I open up the right file in Vcarve it’s there (along with 2 from Vectric, one for Easel mm and one for easel in). Could someone explain in simple terms what I’m doing wrong? Thanks
Create a folder called : Post
Place the: Ventrc-Easle.pp file in the “Post” folder.
In VCarve go to the toolpaths tab. At the bottom right is a icon called: Save Toolpath - select it.
In that tab there is a drop down called: Post processor. Mine is set to V-Carve (inch) (*.gcode)
Highlight the tool path you created and select Save Toolpath(s), search for the Post folder and save your Toolpath in that folder.
Go to easle and select File - Import g-code. Browse and find the Post folder. Select your Toolpath in that folder. Easle should now show a picture of what the Toolpath will carve. Follow the prompts.
Hope that was help.
Worked perfectly, I never noticed the save toolpath function, I only looked under the Toolpath pull down and saw “install post processor”
Very much appreciated guys!!
Thanks again.