Have tried loosening all v wheels and readjusting them. But they all go back to the same positions. The spindle is tilted forward to much, not perpendicular to table. What are my options?
Shims provided everything else is good.
geez,
it looks to me like the axles (screws) are not tight enough.
If that is not the case, then the holed in your carriage are not perpendicular to the surface.
A lot of x’ers switched to axles here a long time ago. My machine has been set up with axels for at least 2 years with no trouble. I bet I can find the thread. Hang on.
Here it is. Old. Very old, and maybe there are better mods but this was super easy. And I think I stole the idea from @ChrisMeyers (could be the wrong Chris Meyers).
Wait - I stole the idea from @BenRios! Here is my homage and his post: