We use cookies to personalize content, interact with our analytics companies, advertising networks and cooperatives, and demographic companies, provide social media features, and to analyze our traffic. Our social media, advertising and analytics partners may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. Learn more.
Hi guys. I decided when I bought my Xcarve that I didn’t want to use use an Ardunio-based controller. Maybe this was a mistake, but my reasoning was that having LinuxCNC installed would give me more flexibility.
Anyway, I bought these controllers from China for $112.
Here are my boards all connected. I do have the Inventables power supply. I plan to document this process as I work through configuring these China boards. I’ll update this as I learn (maybe we can learn together).
Yes, the board can handle an A axis, but I didn’t buy a driver to go with it. Right now I’m able to jog all three of the axes around, but don’t think I have the correct numbers dialed because the movement seems jerky. Going to try to get this dialed in perfect over the next couple of days.
A fourth driver could be use to drive the second Y Axis stepper. So basically you’d have one for each of the Y Axis (Y1 & Y1- which is what I am doing) vs. combining both steppers to one driver.
I have two of these systems for sale if anyone is interested. You’ll have to source your own parallel cable (straight through only). Let it go (BOB and three drivers) for $75.
Okay, using two drivers on y is a great idea which i did not think of. I may try that but for now I have x and z at 3 amp and y at 5 amp. This is done with the dip switches. More details to come.
I may be guessing on some of these settings so bear with me as I work through it.
I’m in it to win it now, so I’m hoping I can find a way to make these serve the purpose. Have some settings I want to try tonight, so hoping they work.
Dan
@Earwigger do you have your settings on timings for them from when you used yours?
I use Mach3. I hooked them up and they worked. The only thing i adjusted was steps per inch and velocity. I am sure these will work just fine for you - especially compared to the stock electronics. If you post a question in a new topic about this software and generic chinese steppers - someone will likely chime in with linux cnc settings for a generic bob.
Well my machine is clearly working, as evidenced by this video. Yes, and I need a better mount for my pencil, obviously.
Frustrating, though, I’ve still not been able to find any suggestions for the following:
STEP TIME
STEP SPACE
DIRECTION HOLD
DIRECTION SETUP
I have searched the internet high and low, and about all I’ve managed to find are people warning NOT TO BUY these awful drivers. They do seem to work, but I will probably swap them for a higher quality product very soon.
Hi guys. It always really bugs me when people don’t circle back to document what they found in threads like these. While I don’t have everything all figured out yet, I do have progress and want to report back.
The settings attached are able to get me moving around and I’ve even done one pretend cut with the router off. I suspect that my hold voltages are wrong, since after cutting, the driver boards seemed fine; but when I accidentally left them on and idle for 20 minutes they were pretty hot. If anyone has any ideas I would love to hear them. I will post my settings for now.
Hi Dan,
I recently got the 5 axis cnc breakout you are using. Unfortunately the cd giving the Windows driver appear empty or damaged.
Please could you send me the file of the windows driver to the e-mail address g.delia@unina.it?
I apologize for the request. I think could be the fastest way to get the windows driver. The seller still not answered to my claim.
Thank you
