I have been procrastinating on this for along while. I wanted a strong mount for the 800W spindle. The 65mm mounts were right for the tiag dovetail. I just needed to extend the universal plate a little. It does not leave much Z-axis movement with the default maker slide. Will probably have to increase its length. Here is the dry fit
2 Likes
What about using Phil’s risers or other lift plates to raise the gantry?
Replace the Entire Z-Axis with a much sturdier z-axis for the 1hp motor? That would be too smart when I could just buy a little longer piece of Maker Slide. Right now just working on dealing with Chinese Grounding! and Err 02 in the VFD. Will worry about having depth when I get up and running 