So after building my My cheap X-Controller Vision I needed to make something to hold my Start. Pause, and Stop buttons. So I designed and 3D printed a remote control so the controller could be under the table and give me easy access to the buttons.
Original design
I lengthen the final remote a half inch and the buttons arrived and are installed
Just need to wire it up!
Nice job! I use game controller to control my machine. 
Looks like M-n-Ms!
Wired up and works perfect!
Diagrams and pix? XD
Well I didn’t take any other pics, but it’s pretty straight forward and here is a diagram and the remotes stl file if you want to 3d print or carve one. I used Cat 5 cable to wire it which was perfect for size.
Remote .stl file https://www.thingiverse.com/thing:2639694
Wiring diagram
