Started a new project.
Follow it on
http://www.manmademayhem.com/?tag=airplane
The objective is eventually to make it fly. Most of the parts were lasercut, some are milled because they were too large.
2 Likes
1 Like
I’ve ordered some depron sheet and am going to redesign a little. I need to get a gram off the weight.
oh, my dream fw 190 will be coming off this machine when I get my head above water.
I’ve thought about electric on this one and am torn. I love to hear the motor.
do you think a roto molded tire could be cast with this and back filled with a flexible foam core?
great! I had no idea so many people would be building planes.
This is my very first time doing something remotely like it, so it’s a learning experience, but it is great.
I thought the aircraft builders here might like to see pictures of the hydrofoils I’m making on XCarve. I’m carving wood, phenolic, acetal, and aluminum parts.
1 Like
Slave the throttle channel and run a nitro motor on the ground. 
four 10s could really jam
progress:
http://www.manmademayhem.com/?p=239
1 Like
Since people have been guessing the model, i might as well post the source files now. 
Balsa is used for most of the parts. Also a small sheet of 1.6mm ply.
For the plastic parts that are in the commercial kit (which I don’t have), I will probably 3D print or mill…
Download here:
http://www.manmademayhem.com/?p=208
ah, those wing roots give it away.