I’ve done a search but can’t find exactly what I’m needing to know. I have the Y axis squared, diagonals are within 1/32’. Now I’m needing to know how to square the X axis to the Y axis. I’ve found a couple posts that mention carving not being squared but it related to an electrical issue(current overload, or some type of binding).
When measuring the distance from end plate on the Y axis to the plate on the end of the X axis, and comparing it to the same measurement on the right side the difference is approximately 1".
I’m trying to get everything as perfectly squared now as I can so there is less to mess with once I get the machine fully assembled. I had actually started to put the belts on last night and noticed that the X didn’t seem squared, but thought I had to be pretty dang close since the Y was. Wrong.
Any help would be greatly appreciated. Getting some batteries for the fish weigh scale today so I can measure belt tension, then will only have the side board to put together along with the control box. SOOOOOOO close!