Does anyone know how long I will sit like this?
Should be less than a minute.
1 Like
I have been like this for 30 min. What should I do?
I was unsure if I had posted. I am here for help not smart mouths!
1 Like
For some reason (and there are many) your computer and the X-carve are not talking to each other.
If you are using windows, check the device manager to see if a COM port exists for the X-carve.
Using the X-controller some people have had to manually install the FTDI com port driver.
2 Likes
Go to this web site, download and install the driver that matches your Operating System (most likely Windows 2017-8-30 2.12.28)
1 Like
In additional to LarryM’s advice, it might be worth trying another USB cable to see if the condition is still present.
Did you download and install the driver package - X-Carve Instructions: Dust Control System
1 Like
Have you tried unplugging and reconnecting your USB cable? That usually fixes it for me when I have this issue.