The instructions for the assembling the 1000mm gantry aren’t as clear as the previous steps and I could us some help.
TLDR
- How many T-Slot Nuts are supposed to be on the top of the MakerSlide Extra Wide 1000mm Tapped Black rail?
- I have the same question but for the back side of the rail.
On this page, it shows one nut already in the top of the MakerSlide, but doesn’t mention to add one.
This page says to “insert two pre-assembly insertion nuts into the groove on the top of the makerslide” but doesn’t give a part number.
The next step says “Before attaching the other gantry side plate, insert two pre-assembly insertion nuts into the top rail of the main rail so that the belting can be attached later”. Does that mean 2 more for a total of 4?
A few steps later, I see at least one t-nut on the back of the MakerSlide, but I didn’t see any steps showing me to insert one (or more) when before putting the side plates on the on.
I’d love to avoid having to taking something apart several steps later to add/remove parts.
Thanks advance for the help.
