I have read a lot on the forum about new folks being frustrated about how to begin. I have also read where people considering purchase were concerned also. Well, I am posting some of my projects to hopefully encourage others to dive into the wonderful world of CNC. I must say that I am completely new to this world. I too looked at this machine and may others for over a year before making the purchase. I tried using Easel at first and failed. Could not design anything. Being determined, I continued to research and study because I wanted to expand into this world.
I purchased my machine in November including a computer. I also installed Inkscape into my computer. I am hoping to be able to show my progress and encourage others.
First project
Made this for my grandson
Had to try a clock with all the discussion on the forum. This was my most complicated project yet. The clock face was carved with a 1/16 " bit. Mickey was carved second with a 1/32" bit. The back pocket was carved with a 1/8" bit.
23 Likes
Looks great. And congrats on not giving up, wonderful job.
Thank you. I am just beginning. Most of the software talk and controller information is totally Greek to me but I am trying to expand my knowledge on each project. If this old dog can learn new tricks, anyone can! That’s the message I want to get out to newbies such as myself. Again, thank you
New project just finishing up.
4 Likes
Thought I would try my hand at making paracord braclets. Here is jig that I just finished.
5 Likes
Just completed the American Flag clock. All hand painted. Clear coat over all areas
6 Likes
A clock that is for the principal of a local high school. This is his philosophy. School colors and logo used. Not bad for couple hours of work. Lots of fun.
6 Likes
Latest project. This will be mounted outside on my home with the flag mounted below the logo. Will post picture when completed
6 Likes
This project was straight from the investables project site. Just uploaded and hit carve. I did not have to change anything. Love it and thank you
6 Likes
Can you post a link to this project. Thanks
I would love too but do not how to add the link
From inside easel or on the project page
Latest project. This is a ceiling tile. The senior class is going to sign and will be placed in the ceiling. Building a legacy for each year of the engineering students.
10 Likes
Never thought of carving a ceiling tile. I thinks the kids will love signing the tile and will give future graduates something to look forward to as well as a feeling of accomplishment
1 Like
This is the link for the tool project that is in the above picture. Hope this will help you.
(Easel - Copy of 5 1/2 X 12 Clamp Rack)
ok trying again. Hopefully if worked this time. Still trying to learn how to do all this software stuff.
1 Like
Thanks Phil. Someday I will get it right. Thanks.
1 Like
Thanks @PhillipLunsford this is a project that I will try someday as it will be cool to have a tray that fits on top of the controller.
Sorry it took so long to figure out how to upload the file. I did change two openings from the original. First the hole that hold the probe connector was too small so I made it slightly larger. Second, the opening that hold the nine bits, it also was a little tight so I made is a little larger also. Good luck with the project. I really like mine. It is so nice having everything in easy reach.
1 Like
