Selling a DIY CNC Machine + Laser 1250mmx1250mm = Ox CNC, Shapeoko, X-Carve
Where do I start with this … It kills me to part with it …
I painstakingly built this machine with the OX CNC … but with a modified Y axis.
This is a large machine, 1250x1250x50mm cutting area, perfect for cutting wood sheets or other such lower profile things. So you can not but recomend this for harder metals unless you go slowly due to the loss on a machine this size.
I have used it in a few months, and even before that.
The original design was a fixed size X axis that can be moved to a smaller size (or larger) Y Axis. It can also be removed from the machine and stored with the Y Axis being upright.
As all the electronics and control are on the X axis. This system works perfectly in this config!
1500x1500mm section for the Y Axis, giving me a 3000x1500mm surface to cut full sheets of wood. Unfortunately the space I had no longer available
3 hours, and laser for approx. 4 hours - that’s all - less than 10 hours of work on this machine 
The machine cost me over $3,000 to build many many hours of working out a design that would fit my aim.
This is a buy and go system, you even get some endmills with it. There is one part that is currently in progress.
Location: Michigan
Price: $2000 + delivery
Let me know if you have any question!
