Mixing techniques (Acrylic half-tone)

X-Carve
1

I have been toying with these for a while and thought I’d post it. I’ve been pretty successful in making both acrylic edge-lit displays as well as half-tone pieces so I decided to mix the two together. These are half-tone images either using varying sized holes or waving lines. Kind of a nice effect:

IMG_20180611_222433143
IMG_20180611_2224331432121×2828 1.8 MB
IMG_20180614_220121680
IMG_20180614_2201216802121×2828 1020 KB
IMG_20180614_110254269
IMG_20180614_1102542692121×2828 1.46 MB
IMG_20180313_191013529_LL
IMG_20180313_191013529_LL2121×2828 2.18 MB
IMG_20180313_191005223
IMG_20180313_1910052232121×2828 1.7 MB

Just thought I’d share an idea…

11 Likes
2

Very cool!

3

that is pretty cool. You could also do a cross section and stack them for a holographic effect which would be pretty cool.

4

Yea i was thinking about that. I have some ideas… we’ll see :slight_smile: