I recently received my J-Tech laser for X-Carve
I wonder if I have to remove it every time I will rout
something because I use Inventablel’s dust collector
It depends. Jtech sells a dust boot compatible mount. Check your order or their site to determine which mount you have. (They are very different, so if you cannot tell from the invoice, then you should not have a problem matching up what you have on the site.)
I bought a mount from Phil which mounts to the front. I just slip the bottom of the shoe off and slode the laser in and go.
1 Like
Thx Wayne
Do you have a picture of it
And a link to Phil
This should get you there and you can see what it looks like. http://www.designsbyphil.com/
2 Likes
Thx Wayne
1 Like