Can someone look at my design and tell me which bit I use to carve this out of a Whiskey Barrel Head? I only have the bits that came from Inventables with my 1000mm. Any help would be greatly appreciated.
Thanks in advance
Patty
looks like a 1/16" is a little to big so you would need to go to a 1/32". 2 stage would be faster or use a v bit.
1 Like
That will take a pretty small bit unless it was v carved. I don’t know the sizes you have but a 1/32 would work. I would take a trip to lowes/ menards/ home depot and pick up a v bit unless you have the time to order one.