Box joints

MorrisMallard · July 18, 2016, 12:22pm

has anyone done boxjoints

NAM37 · July 18, 2016, 12:37pm

http://www.tailmaker.net/box-joints.html

B.F · July 18, 2016, 1:34pm

ErikJenkins · July 18, 2016, 1:37pm

This was cut with the Tailmaker program @NAM37 mentioned above.

EddieVillarreal · September 21, 2016, 9:06am

I love what you did with this box! What program did you use to run the Gcode?

ErikJenkins · September 21, 2016, 12:30pm

Thanks! The G-Code was generated with the Tailmaker program and sent to the X-Carve with Universal G-Code Sender.

EddieVillarreal · September 21, 2016, 9:33pm

Thanks for the info. Did the .tap plug in directly into UGS, or did you have to edit lines?

ErikJenkins · September 21, 2016, 9:36pm

I edited the header, I took a header from a V-Carve generated G-Code and just pasted that to the beginning. If you go this route, make sure you know what commands you are pasting

EddieVillarreal · September 21, 2016, 10:02pm

Damn, I’m green when it comes to reading the codes. I’m still learning.

ErikJenkins · September 21, 2016, 10:04pm

I’ll pull up the actual files and let you know what I did…it won’t be until the weekend. It wasn’t much.

EddieVillarreal · September 21, 2016, 10:17pm

956-279-1749. eddievillarreal7@aol.com. feel free to text/email me directly. i appreciate your help!