Fully Assembled - no Spindle
I need to sell it because I dont have a room to use it anymore (to loud for a rented apartement). 
I will put some Picture in here this week!
Hi Sebastian,
Waiting for the photos, whats the price?
Bye
Gio
Hi,
Where in Germany are you selling the x-carve?
kind regards
Peter
Do you still have the x-carve?
Sorry for the long delay.
A first tried to use the X-Carve in our apartement with an enclosure. But the high frequent noise was too much…
So. Here are some pictures of the X-Carve. You can see that the wasteboard is as good as new.
The noise of the stock fan on the controller was too loud for me. So I put the controller in a used looking box (you can cnc a new on if you don’t like it) with an old cpu cooler on top. The 12V for that are coming from an old pc power box that I also used for the lights in the enclosure (3V, 5V and 12V, or if mixed something in between, is the output of that).
I also died some cable management. You can new easily plug in and out the X, Y, Z and stepper cables.
If you don’t like my cable management, you can put it back to stock. The parts for that are included.
There is no spindle included. Mine a gave to a friend because his died last mounth. But I have a unused bosch colt spindle mount if you like to have it.
All of these clamps are included. I made some of them before a got the new set from a friend of mine.
I hope that the pictures help you. The X-Carve is used about 200h. After delivery and toll I have payed ~1300€. So send me some good offers. 
If you have any questions so ask ask ask… 
